Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5. Measure the depth of the gap in the brake check hole with a caliper.
6. Compare the measured brake wear value with the maximum allowed value for brake wear.
You can find the maximum value for the brake wear in the brake data sticker on the brake.
The brake wear value varies according to the brake manufacturer and brake series.
For each brake type, the maximum value for the wear is indicated on the brake data
NOTA
sticker on the brake.
Do not exceed the maximum value for the brake wear.
7. If the brake has worn more than the maximum allowed criteria, replace the brake.
8. Check the secondary brake.
If the hoist has a double brake, the brake assembly includes also a secondary brake. The
secondary brake (2) is the brake that is on the top in the double brake assembly.
The secondary brake is a holding brake that works as a back-up brake for the main brake
(1). The secondary brake is the functional brake only, if the main brake is damaged and not
able to hold the load.
Este documento y la información contenida en éste son de propiedad exclusiva de Verlinde S.A.S., constituyen un
secreto comercial no público, confidencial del propietario, y no puede ser ni reproducido, divulgado a terceros,
modificado ni empleado de ninguna otra manera sin el permiso expreso escrito de Verlinde S.A.S. Copyright 2020 ©
Verlinde S.A.S. Todos los derechos reservados.
IQ BFK457-06
COMPACT
190V DC
20W
Nr: 13319905
2.8NM
DD.MM.YY
max@ 20°C ;
xx.x mm
7 MAINTENANCE
3/2020
Tabla de contenido
