Removing And Installing The Hoist Covers - Verlinde Stagemaker SL10 Manual Del Propietário

4.5

Removing and installing the hoist covers

1. Make sure that you have disconnected the chain hoist from the main power supply network.
2. To access the components on the brake side, loosen the four screws of the end cover on
the brake side. Remove the end cover.
3. To access the components on the motor side, loosen the four screws of the end cover on
the motor side. Remove the end cover.
4. To install the end covers, put the end cover back on its place on the hoist frame. Tighten the
fours screws to the correct tightening torque.
For more information, see chapter Tightening torques for the chain hoist.
Este documento y la información contenida en éste son de propiedad exclusiva de Verlinde S.A.S., constituyen un
secreto comercial no público, confidencial del propietario, y no puede ser ni reproducido, divulgado a terceros,
modificado ni empleado de ninguna otra manera sin el permiso expreso escrito de Verlinde S.A.S. Copyright 2020 ©
Verlinde S.A.S. Todos los derechos reservados.
MANUAL DEL PROPIETARIO
3/2020