Symbols On The Robotic Mower, Battery, Docking; Station And Power Supply; Engineering Improvements; Fcc 15 Compliance Statement - Stihl RMI 632 P Manual De Instrucciones

22 Specifications
– Permissible ambient temperature range during use or
storage: 32 °F to 122 °F (0 °C to 50 °C)
HLG-185H-42VUSM Power Supply
For use only with STIHL ADO 601 Docking Station.
– Input Voltage: 100 V to 240 V
– Frequency: 50/60 Hz
– Output Voltage: 42 V
– Insulation: Class I (chassis is grounded with a separate
terminal)
– Protection rating for power body: IP67 (protected from
total dust ingress)
– Permissible ambient temperature range during use or
storage: 32 °F to 122 °F (0 °C to 50 °C)
22.4 Symbols on the Robotic Mower, Battery,
Docking Station and Power Supply
Symbol Explanation
V Volt
Hz Hertz
A Ampere
Ah Ampere hour
W Watt
Wh Watt hour
AC Alternating current
IP Degree of electrical protection
Cutting width of the mowing blade in centimeters
STIHL products must not be disposed of in the
household trash, but only in accordance with local,
state and federal laws and regulations and as
provided in this manual, @ 24.
Direct current
0478-131-3046-A
Number of cells and stored energy according to cell
manufacturer's specification. Usable energy
available to the operator will be less.
The RBRC seal indicates that STIHL has prepaid for
battery recycling.
Insulation: Class III (designed to be supplied from a
separated/safety extra-low voltage (SELV) power
source)
Certification/listing mark of UL.

22.5 Engineering Improvements

STIHL's philosophy is to continually improve all of its
products. As a result, engineering changes and
improvements are made from time to time. Therefore, some
changes, modifications and improvements may not be
covered in this manual. If the operating characteristics or the
appearance of your machine differs from those described in
this manual, please contact your STIHL dealer or the STIHL
distributor for your area for assistance.

22.6 FCC 15 Compliance Statement

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
– this device may not cause harmful interference.
– this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
English
81