Stihl RMI 632 P Manual De Instrucciones página 21

9 Key Features
► To activate the disabling device in the "Settings" menu,
open the "Safety" submenu, select "Lock iMow" and
confirm by pressing the OK button, @ 15.4.
To deactivate the disabling device:
► Wake up the robotic mower, if required, by pressing any
button.
► Press the Mow button and the OK button in the sequence
illustrated on the display.
Once the disabling device is deactivated, the robotic
mower can be operated again.
3. Two-hand operation
During manual mowing, you can only activate the
mowing blade by pressing the OK button and the
Mow button at the same time.
After the mowing blade is activated, the OK button
can be released, but you must continue to hold down
the Mow button while working in manual mode.
4. Impact sensor
The hood is designed to function as an impact sensor.
During automatic operation, the robotic mower stops if the
hood contacts a solid obstacle taller than 3.9 in. (10 cm).
The robotic mower then turns and continues automatic
mowing in another direction. If the impact sensor is triggered
too frequently, the mowing blade will stop rotating.
NOTICE
The impact sensor may not detect certain obstacles, such as
small flower pots or other lighter objects, which can be
knocked over or damaged. STIHL recommends removing
obstacles or blocking them off by creating restricted areas
through the placement of the perimeter wire, @ 11.5.
5. Lifting protection
If you attempt to lift the robotic mower by the hood or at the
carrying handle during operation, its lift sensor will be
activated and will stop the mowing blade within a short
period. Nevertheless, do not attempt to lift or reach under
0478-131-3046-A
the robotic mower for any reason without first activating the
disabling device and ensuring that the mowing blade has
stopped.
6. Tilt sensor
If the robotic mower exceeds the permissible incline of more
than 24° (45 %), the robotic mower will turn and continue
mowing in a different direction. An incline of 24° corresponds
to a vertical height increase of a = 17.7 in. (45 cm) for a b =
39.4 in. (100 cm) horizontal distance. Exclude such inclines
from the mowing area and trim the excluded area with a
suitable line trimmer or other tool.
In the event of a rollover, the wheel drive stops and the
mowing blade will stop within a short period.
7. Illuminated display
The display is backlit during operation to help you track the
robotic mower in darkness.
8. Anti-theft alarm
When the anti-theft alarm is activated:
– An alarm signal sounds when the robotic mower is lifted
unless the PIN code is entered within one minute,
@ 15.4.
– If you replace the docking station or robotic mower after
completing the initial setup, you will need to link the
robotic mower and docking station before use, @ 10.6.
a
24°
b
English
19