Safety - Stihl RMI 632 P Manual De Instrucciones

15 Settings
ASM (Anti-Stuck-Maneuver)
The robotic mower starts an evasive routine if it becomes
stuck: ASM is switched on by default.
► Switched off ASM, if there are large, flat expanses in the
mowing area (e.g. asphalt driveways), if the robotic mower
often unexpectedly turns 90° during operation or if the
mower unexpectedly stops mowing and the display shows
the message "1131 - Stuck".
New installation
The current mowing plan will be deleted and the
installation assistant will start again.
Starting points
To set starting points, see @ 15.6.
Test edge
Start a test run for checking correct wire routing. The
step "Check installation" of the installation assistant
will be called up, @ 10.7.
► To check correct wire routing around restricted areas,
position the robotic mower in the mowing area with the
front facing the restricted area and start the test run.
Edge mowing
Select the mowing frequency for edges.
► Select one of three options:
– Never: The edges will never be mowed.
– Once (default): The edges will be mowed once a week.
– Twice: The edges will be mowed twice a week.
Secondary areas
Enable or disable secondary areas.
► Activate to enable mowing of a secondary area.
0478-131-3046-A

15.4 Safety

Disab. device
To activate the disabling device in the "Settings"
menu, open the "Safety" submenu, select "Lock
iMow" and confirm by pressing the OK button.
To deactivate the disabling device, press the Mow
button and the OK button in the sequence illustrated
on the display. Once the disabling device is
deactivated, the robotic mower can be operated
again.
Level
Four security levels can be set. Various locks and
security devices are activated, depending on the
level.
► Select one of four options:
1) None: All functions of the robotic mower can be
accessed.
2) Low:
– Anti-theft alarm: If the mower is lifted or tilted for
longer than 10 seconds, the PIN query appears. If you
do not enter then PIN code within one minute, an
alarm sounds and automatic operation is switched off.
– Connection lock: The PIN code must be entered prior
to linking of the robotic mower and docking station.
– Reset lock: The PIN code must be entered prior to
resetting the machine to the factory defaults.
3) Medium:
– All of the features from the "Low" setting.
– Time lock: PIN code query for changing a setting if no
PIN code has been entered for more than one month.
4) High:
– All of the features from the "Medium" setting.
– Setting protection: The PIN code must be entered
before settings can be changed.
► Select the desired security level and confirm it by pressing
the OK button.
► If necessary, enter the 4-digit PIN code.
English
55