Completing The Initial Installation And First Mowing Operation - Stihl RMI 632 P Manual De Instrucciones

10 Installing the Robotic Mower
To complete programming:
► Confirm the active times for Sunday.
The final mowing plan will be displayed.
► Confirm the displayed mowing plan by pressing the OK
button on the control panel / manual controller.
The final step of the installation assistant will be called up.
► Select "Change" if you need to modify one of the active
times.
Before changing the active times or mowing duration on your
iMow, see the chapters on the Mowing Plan, @ 14.5,
@ 14.6 and @ 14.7.
NOTICE
If you have a sprinkler system, program the robotic mower
to avoid active watering times in order to reduce the
likelihood of damage to the sprinkler heads from contact with
the mowing blade. The mower and sprinkler system should
never be run at the same time.
NOTICE
Avoid contacting the perimeter wire when de-thatching or
aerating the lawn. Also use caution when operating a line
trimmer near the perimeter wire. De-thatching, aerating and
trimming operations can result in a cut or damaged
perimeter wire. Refer to your sketch of the mowing area and
take special care to avoid the perimeter wire when
performing these operations.
0478-131-3046-A
10.9 Completing the Initial Installation and First
Mowing Operation
WARNING
Inspect the mowing area. Just as you would before starting
a mowing operation with a traditional lawn mower, remove
all sticks, stones, pieces of metal, glass, wire or other
objects that could be thrown or flung by the cutting
attachment, damage the cutting attachment or cause
damage to property (e.g., parked vehicles, windows).
Remove objects from the mowing area such as toys, balls,
lawn furniture, landscape ornaments, flower pots, garden
hoses, lawn equipment and anything else that could impede
the proper operation of the robotic mower or become
entangled in its mowing blade.
► Complete the initial installation by pressing the OK button
on the control panel / manual controller.
If you complete the initial installation during an active time,
the robotic mower will immediately begin to mow.
If you complete the initial installation outside an active time,
you can start a mowing operation by pressing the OK button
on the control panel / manual controller.
► If you do not want the robotic mower to mow immediately,
select "No" and press the OK button on the control panel /
manual controller.
English
33