Cleaning, Desinfecting, Sterilization And Product Care; Disinfecting And Cleaning; Care And Checking For Damage; Sterilization Method And Parameters - B.Braun Aesculap Nelson Deluxe Instrucciones De Manejo

5. Cleaning, desinfecting, sterilization
and product care
Note
Accessories such as the electrode handle, active electrodes, neutral
electrodes and cables must be prepared, applied and sterilized as de-
scribed in their corresponding instructions for use.
Do not sterilize single-use electrodes, disposable cables and single-use
handles!

5.1 Disinfecting and cleaning

Risk of electric shock and burns!
Be sure to unplug the device before cleaning it.
Do not use flammable or explosive cleaning or
WARNING
disinfecting solutions.
Be sure that no fluids are allowed to penetrate
the device.
Only use cleaning and disinfectant solutions that are allowable for
cleaning surfaces under national laws.
Never lay the device in water or cleaning solution.
Never disinfect the product mechanically or by boiling it.
Allow any fluid that penetrates the product to run out immediately.
Apply cleaning and disinfectant solution.
Wipe away cleaning and disinfectant solution with a sponge or
cloth that has been moistened in clean water.
Dry the unit with a clean, lint-free cloth.

5.2 Care and checking for damage

Inspect all cables, and in particular electrode cables, for any dam-
age to their insulation.
Perform a safety inspection annually (see Safety inspection).

5.3 Sterilization method and parameters

The high-frequency surgical device
sterilized.
52
High frequency surgical device

6. Maintenance

The high-frequency surgical device
nance-free product.

6.1 Safety inspection

A safety inspection must be carried out annually.
The person performing the inspection documents the results of the in-
spection as well as the measurement values in conformance with the
inspection protocol form.
(GN 640) must not be
Only have the product and its accessories inspected by persons who
possess the requisite training, knowledge and experience and who
are authorized to do so.
In the event significant deviations from the inspection protocol
values are found, or if the prescribed maximum values are exceed-
ed: Send the device to the service facility indicated herein (see
Technical Service).
(GN 640)
(GN 640) is a mainte-