Before Use - Hilti BX 3-ME Manual De Instrucciones

Threaded studs for single-fastener operation
Fastening electric cables
Examples of approved fasteners for use in drywall installation work (permissible only in conjunction with the
X-FG B3-IF fastener guide)
Nails for magazine operation
Nails for single-fastener operation
Battery
Rated voltage
Capacity
Energy capacity
Weight
NOTE
The sound pressure and vibration values given in these instructions have been measured in accordance with a
standardized test and may be used to compare one electric tool with another. They may be used for a preliminary
assessment of exposure. The data given represents the main applications of the electric tool. However, if the electric
tool is used for different applications, with different accessories or is poorly maintained, the data may deviate from the
given values. This may significantly increase the level of exposure over the total working period. An accurate estimation
of exposure should also take into account the times when the tool is switched off, or when it is running but not
actually being used for a job. This may significantly reduce the level of exposure over the total working period. Identify
additional safety measures to protect the operator from the effects of noise and/or vibration such as: maintaining the
tool and the accessories, keeping hands warm, organization of work patterns.
Noise and vibration information (measured on the basis of EN 60745‑2‑16)
Typical A-weighted sound power level, L
Typical A-weighted emission sound pressure level, L
Uncertainty for the given sound level, K
1 The value applies to driving nails into concrete and steel.
Total uniaxial vibration value (in z-direction)
Vibration emission value, a
Uncertainty, K
1 The value applies to driving nails into concrete and steel.

5 Before use

WARNING
Risk of accident! Pushing the fastener guide into the
tool through pressure applied by part of the body makes
the tool ready for driving a nail in a way that is contrary
to instructions. Never use a part of the body to push in
the fastener guide. Never pull the fastener guide back
with your hand or with another object. Do not override
B 22/2.6 Li‑Ion (02)
21.6 V
2.6 Ah
56.16 Wh
0.48 kg
1
WA
1
h
X-M6-7-14 B3 P7 | X-M6-7-24 B3 P7 |
X-W6-12-14 B3 P7 | X-W6-12-20 B3 P7
X-EKB MX | X-ECT MX | X-ECH MX | X-EKS MX | X-
EKS C MX
X-P 17 B3 MX | X-C 20 B3 MX | X-C 24 B3 MX
X-P 30 B3 P7 | X-P 36 B3 P7
B 22/3.3 Li‑Ion
21.6 V
3.3 Ah
71.28 Wh
0.78 kg
100 dB (A)
89 dB (A)
1
pA
3 dB (A)
2.5 m/s²
1.5 m/s²
the contact pressure safety device when inserting a
fastener in the fastener guide.
CAUTION
The nail pusher, if it jumps back under spring pressure,
may cause injury and damage to the fastening tool. When
pulling the nail pusher down, take care to ensure that
it engages securely. Do not allow the nail pusher to
jump back under spring pressure.
B 22/5.2 Li‑Ion
21.6 V
5.2 Ah
112.32 Wh
0.78 kg
19
en