Functional Description; Blade Guard; Bench Mounting - Makita LS1040 Manual De Instrucciones

Sierra de inglete mixta
Ocultar thumbs Ver también para LS1040:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

INSTALLATION
Installing auxiliary plate
Installing the auxiliary plate using the notch in the tool's
base and secure it by tightening the hex bolt.
1
2
► 1. Auxiliary plate 2. Hex bolt 3. Base
1
3
► 1. Auxiliary plate 2. Base 3. Hex bolt 4. Nut

Bench mounting

When the tool is shipped, the handle is locked in the
lowered position by the stopper pin. Release the stop-
per pin by lowering the handle slightly and pulling the
stopper pin.
► 1. Stopper pin
3
2
4
1
This tool should be bolted with two bolts to a level and
stable surface using the bolt holes provided in the tool's
base. This will help prevent tipping and possible per-
sonal injury.
1
9 x 2
185 mm
► 1. Bolt
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.

Blade guard

► 1. Blade guard
When lowering the handle, the blade guard rises auto-
matically. The guard is spring loaded so it returns to
its original position when the cut is completed and the
handle is raised. NEVER DEFEAT OR REMOVE THE
BLADE GUARD OR THE SPRING WHICH ATTACHES
TO THE GUARD.
In the interest of your personal safety, always maintain
the blade guard in good condition. Any irregular opera-
tion of the blade guard should be corrected immediately.
Check to assure spring loaded return action of guard.
NEVER USE THE TOOL IF THE BLADE GUARD OR
SPRING ARE DAMAGED, FAULTY OR REMOVED.
DOING SO IS HIGHLY DANGEROUS AND CAN
CAUSE SERIOUS PERSONAL INJURY.
6 ENGLISH
1
219 mm
1
Tabla de contenido
loading

Este manual también es adecuado para:

Ls1040f

Tabla de contenido