Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TECHNICAL TROUBLESHOOTING GUIDE
9
PROBLEMS
The kneading paddles remain stuck in
the bread trough.
The kneading paddles remain stuck
in the loaf.
After pressing on
nothing happens.
After pressing on
the motor is on
but no kneading takes place.
After a delayed start, the bread has not
risen enough or nothing happens.
Burnt smell.
10
WARRANTY
• This product has been designed for domestic use only. Any professional use, innapropriate
use or failure to comply with the instructions, the manufacturer accepts no responsibility
and the guarantee will not apply.
• Read the instructions for use carefully before using your appliance for the first time: any use
which does not conform to these instructions will absolve Tefal from any liability.
11
ENVIRONMENT
• In accordance with current regulations, before disposing of an appliance no longer
needed, the appliance must be rendered inoperative (by unplugging it and cutting off the
supply cord).
SOLUTIONS
• Let it soak before removing it.
• Use the accessory to turn out the loaf (page 284).
• The machine is too hot. Wait for 1 hour between 2 cycles (error
code E01).
• A delayed start has been programmed.
• The pan has not been correctly inserted.
• Kneading paddle missing or not installed properly.
• You forgot to press on
• The yeast has come into contact with salt and/or water.
• Kneading paddle missing.
• Some of the ingredients have fallen outside the pan: let the
machine cool down and clean the inside of the machine with
a damp sponge and without any cleaning product.
• The preparation has overflowed: the quantity of ingredients
used is too great, notably liquid. Follow the proportions given
in the recipe.
301
after programming.
EN
Tabla de contenido
