TRAPP ES-500 Manual De Instrucciones página 53

www.trapp.com.br
The animal ration shredder is provided with a feeding
system comprised of two horizontal cylinders, being
the upper cylinder movable and pressed by two
springs, as shown in Figure 10.
This system assures uniform cutting as the product is
equally pulled into the machine.
If pressure on the springs decrease, change the

position of the pin to the upper hole (A), as shown
in Figure 11.
Replace the springs if they lose pressure, in order to

do that, contact a TRAPP Service Technician.
Attention!
Whenever pressure increases, increase it on

both springs.
To increase the life of the springs, disassemble

them before long periods of no use.
Upper Cylinder Pressure
Figure 10
Figure 11
Springs
Image merely illustrative
A
Image merely
illustrative
53