Main Components - TRAPP ES-500 Manual De Instrucciones

www.trapp.com.br
Upper Exit
Ration Outlet Device
Ration Feeding
Device
Indication table to change
cutting size
The universal base is provided with fixation
points (1) dimensioned according to the trestle
and to the movable rails to fix the motor. Once
the shredder and the motor are placed on the
universal base, align the pulleys.
After that, fix the rubber cushions (2) as shown
in the Figure 1. Finally, place the belts which
will have to be stretched with the stretcher (3)
located at the base (4).

Main Components

Disk
Cylinder Feeders
Transmission Box
Support
Universal Base Installation
2
3
Figure 1
Motor
Base
Image merely illustrative
Image merely
illustrative
4
1
1
45