TRAPP ES-500 Manual De Instrucciones página 42

Remove all objects before turning on the

equipment. A tool or any other object stuck in the
movable parts of the equipment may result in an
injury.
4 - Utilización y cuidados
Do not overuse the equipment. Use it in the right

way and for the purposes described in this manual
for better performance and safety while working.
Do not use the equipment if the switch does not

turn on/off. The equipment can not be controlled
if the on/off switch is damaged. A defective switch
shall be immediately repaired.
Switch off the circuit breaker, remove the fuses

or unplug the equipment before servicing,
substituting the cutting blades and accessories.
These safety preventive measures reduce the risk of
accidental operation of the equipment.
Do not allow people that are not familiarized

with the equipment to use it. The equipment may
become dangerous in the hands of people not
familiar with its operation.
Preserve your equipment. Frequently check if

the movable parts are fixed, if any component is
damaged or check for any other condition that may
affect its optimum operation. Shall any problem
arise, fix it before using the equipment. Many
accidents are caused by lack of proper maintenance.
Keep the cutting blade sharp and clean.

Additional Safety and Operation Instructions
Make sure the voltage of the power source is the

same of that of the equipment.
Carefully read instructions and get familiar with the

controls and proper used of the equipment.
Remember that the operator or user is responsible

for any accident or damage involving people or their
properties.
Use the shredder in a flat place and free of obstacles.

Avoid operating the equipment in humid places.

Use the equipment in a well lit environment.

Before feeding any kind of foliage, start the motor

and wait for it to reach maximum revolution.
42
The cutting blade keeps moving after the

equipment is switched off. Therefore be aware of
that when servicing.
Use the equipment and accessories according to the

instructions in this manual. Take in consideration
the working conditions and the service to be done.
Using the equipment for operations not. covered in
this manual may result in dangerous situations.
Do not insert other material that is not recommended

inside the shredder, if necessary to chop or crush
another product that is not recommended, you can
contact the factory.
Note:
According to the Brazilian standard
NBR 5410, it is compulsory to install a device
to protect against residual differential current
(DR device) in the electrical installation of your
residence. The function of the "DR" is to protect
the user against serious electrical shock risk
(consult an electrician).
5 - Service
Call qualified professionals to service the

equipment. Use original parts only. Always
call TRAPP Authorized Service Technicians.
TRAPP is not responsible for occasional
accidents caused by the use of spare parts that
are not original.
Do not introduce anything in the equipment with

the motor off.
Do not use the equipment during periods of power

supply failure.
Whenever cleaning or servicing, make sure the

motor is off and the blade is still. Then unplug the
equipment, disconnect the cardan shaft from the
tractor and remove the spark plug cable from the
gasoline motor.
If the equipment starts to vibrate, turn it off

immediately. Check the cause of the vibration as it
indicates that the equipment needs adjustment and
repair.
www.trapp.com.br