Mounting The Plasma Segment Holder - Abicor Binzel ABIPLAS WELD CT Serie Manual De Instrucciones

®
ABIPLAS WELD CT

6.3 Mounting the plasma segment holder

1 Fastener
2
Segment holder
Fig. 5 Mounting the plasma segment holder
In each of the five adjustable positions (offset by 15°), only four bores are congruent. Three for
the cylinder head screws and one marked for the dowel pin.
 Please observe the enclosed instruction leaflet.
1 Move the bracket (1) and segment holder (2) into position and secure with the cylinder
bolt (4).
2 Use the cylinder head screws (3) to connect the segment holder (2) and the bracket (1).
BAL.0128 • 2019-09-04
1
4
3
3 10x cylinder head screws M5 × 18
6 Putting into operation
2
4 Cylinder bolt 5 m6 × 20
EN - 13