115 Erasing The Imaging Plate; 116 Switching The Unit Off - Air Techniques ScanX Intraoral View Instrucciones Para Montaje Y Uso

Usage
11.5 Erasing the imaging plate
The image data is erased automatically after
scanning
If you do not want the image data to be erased,
this function can be disabled for the current
scanning process by selecting Disable erasing
EN
light on the touch screen of the unit
US
The special ERASE mode only activates the
erasure unit of the imaging plate scanner No
image data is scanned
The PSP needs to be erased using the special
mode in the following cases:
– The first time the PSP is used, or if it is stored
for more than one week
– Due to an error, the image data on the PSP
has not been erased (software error mes-
sage)
Erasing the PSP via a computer
Select the special ERASE mode in the soft-
i
ware
Scan the PSP (see "113 Scanning the image
i
data via a computer")
Erasing the PSP via the touch screen
On the touch screen, tap on Quick scan
i
Select the scanning mode ERASE
i
Scan the PSP (see "114 Scanning image
i
data via the touch screen on the unit")
11.6 Switching the unit off
Press the on/off switch for 3 seconds
i
As soon as the unit has shut down it switch-
es off completely The touch screen is off
After you switch off the unit, wait 10 s
before switching the unit on again
42
OBJ_DOKU-0000003578-mehrere-011.indd 42
2151100018L40 1903V012
09.04.2019 10:51:19