Air Techniques ScanX Intraoral View Instrucciones Para Montaje Y Uso página 19

The transport mechanism guides the PSP
through the unit A laser in the scanner unit
scans the PSP The scanned data is converted
into a digital image
If a scanning job is started via the imaging soft-
ware, the image is automatically transmitted to
the computer
If a scanning job is started via the touch screen,
the image is saved to the memory card and
needs to be transferred to the computer later
on
After scanning, the PSP runs through the era-
sure unit Image data still present on the PSP is
erased with the aid of bright light
The PSP is then ejected for re-use
The unit can scan up to four PSPs simultane-
ously at the same resolution
User interface
1 Touch screen
2 On/off switch
The touch screen allows the unit to be operated
when it is not connected to a computer Instruc-
tions can be entered on the touch screen either
with the tip of a finger or the Stylus
The Help button can be used to open a help
page for the respective page The Messages
button can be used to call up current messag-
es
2151100018L40 1903V012
OBJ_DOKU-0000003578-mehrere-011.indd 15
Connections
The connections are located on the rear of the
unit
1
2
1 2 3 4
1 Reset button
2 Connection for power supply unit
3 AUX connection for diagnostic units
4 Network connection with status LED
ScanManager
When the ScanManager is enabled, more than
one X-ray job can be transmitted simultaneously
to the unit from different computers The unit
manages the X-ray jobs in a queue from which
the respective X-ray job can be selected using
the touch screen and then executed
Without ScanManager, the unit processes one
X-ray job at a time and is blocked until this job
has been completed During this time, no further
X-ray jobs can be transmitted to the unit from
other computers
ScanManager can be enabled via Set-
tings > System Settings> Operating
Type
Product description
15
09.04.2019 10:51:12
EN
US