Air Techniques ScanX Intraoral View Instrucciones Para Montaje Y Uso página 45

CAUTION
Loss of image data caused by stray
ambient light entering the unit
Remove the intraoral/extraoral plate
i
protector only after the phosphor stor-
age plate has dropped into the col-
lecting tray
Place a finger on the printed surface of the
i
phosphor storage plate and push downwards
until the phosphor storage plate is drawn in
automatically
Scanning progress is displayed on the touch
screen Image data is saved automatically
The touch screen only shows a pre-
view as an initial impression of the X-
ray image Limitations to image pre-
views occur due to image size and/or
exposure conditions For purposes of
diagnosis, the X-ray image must be
viewed on a diagnostic monitor
After it has been scanned, the phosphor
storage plate is erased and drops into the
collecting tray
Save the X-ray image
i
Remove the PSP and prepare it for recording
i
another X-ray image
Remove the plate protector
i
2151100018L40 1903V012
OBJ_DOKU-0000003578-mehrere-011.indd 41
Transmitting image data to the computer
X-ray images generated via the touch screen on
the unit are saved to the SD card These X-ray
images can be imported into an imaging soft-
ware via a network connection (eg DBSWIN)
Connect the unit to the network
i
Start the imaging software
i
Start the image import via the imaging soft-
i
ware (for further information, refer to the man-
ual of the imaging software)
Save the image data
i
The image data on the memory card is
erased automatically as soon as the transfer
has been successfully completed
Usage
EN
US
41
09.04.2019 10:51:19