Air Techniques ScanX Intraoral View Instrucciones Para Montaje Y Uso página 39

Place the PSP in the barrier envelope into the
i
patient's mouth
Doing this, make sure that the active side of
the PSP faces the X-ray tube
Set the exposure time and setting values on
i
the X-ray unit (see "83 X-ray unit settings")
Record the X-ray image
i
Result:
The image data must be scanned within 30 min-
utes
Preparing for scanning
CAUTION
Light erases the image data on the
phosphor storage plate
Never handle exposed phosphor stor-
i
age plates without either a barrier en-
velope or an intraoral/extraoral plate
protector
Wear hand protection
Remove the PSP with the barrier envelope
i
from the patient's mouth
WARNING
Contamination of the unit
Clean and disinfect the barrier enve-
i
lope before removing the PSP
In the event of heavy soiling, e g from blood,
i
dry clean the barrier envelope and protective
gloves, e g wipe with a clean cellulose cloth
2151100018L40 1903V012
OBJ_DOKU-0000003578-mehrere-011.indd 35
2
e
s it e s id O p p o
.
s tu b e
to w a rd
2 1 4 2
8 7
4 7 5
D 4 8
a
Disinfect the barrier envelope and protective
i
gloves with a disinfection wipe
Alternatively, use a spray disinfectant on a
soft, lint-free cloth
Allow the barrier envelope to fully dry
i
Pull off the protective gloves, disinfect and
i
clean the hands
NOTICE
Powder from the protective gloves
on the PSP damages the unit during
scanning
Completely clean all traces of the pro-
i
tective glove powder from your hands
before handling the PSP
Tear the barrier envelope and place the phos-
i
phor storage plate in the transfer box
If the active side of the phosphor storage
plate is facing up, turn the phosphor storage
plate over immediately
Usage
EN
US
35
09.04.2019 10:51:18