Electrical Connection - Air Techniques ScanX Intraoral View Instrucciones Para Montaje Y Uso

7.7 Electrical connection

Electrical safety when making connections
Connect the device to a correctly installed
i
power outlet only
i
Do not operate any other systems using the
same multiple socket
Make sure that none of the electrical cables
i
leading to the unit are under any mechanical
tension
Before initial start-up verify that the mains
i
supply voltage and the voltage stated on the
type plate match (see also "4 Technical
data")
Connecting the unit to the mains supply
The unit has no main power switch
Therefore, the unit must be set up appro-
priately such that the power outlet is eas-
ily accessible so that the unit can be un-
plugged if necessary
Requirements:
– Correctly installed socket outlet in the vicinity
of the unit (max length of mains cable 3 m)
– Easily accessible power outlet
– Mains voltage matches the information
shown on the type plate of the power supply
unit
Plug the mains cable supplied with the unit
i
into the power supply
2151100018L40 1903V012
OBJ_DOKU-0000003578-mehrere-011.indd 25
Plug the connecting plug of the power supply
i
unit into the connection socket of the unit
Plug the mains plug into the power outlet
i
The connection plug has a locking sys-
tem To unplug the unit, slide the housing
of the connector backwards Do not pull
on the cable
Installation
EN
US
25
09.04.2019 10:51:15