Beurer BM 77 Manual De Instrucciones página 32

Adopting the correct posture
• To carry out a blood pressure measure-
ment, make sure you are sitting upright
and comfortably. Lean back and place
your arm on a surface. Do not cross
your legs. Place your feet next to each
other flat on the floor.
• Always make sure that the cuff is at
heart level.
• To avoid distorting the measurement,
you should remain as still as possible
during the measurement and not speak.
Performing the blood pressure measurement
• To start the blood pressure monitor, press
the Start/stop button
ments are briefly displayed.
The blood pressure monitor will begin the
measurement automatically after approx. 3
seconds. The cuff inflates as the first step..
Measuring can be cancelled at any time by pressing
the Start/stop button
• Then the air pressure in the cuff is slowly released.
Now the measurement starts. As soon as a pulse is
found, the pulse symbol
• If a tendency towards high blood pressure can already
be identified, it is possible that the cuff may inflate
again to a higher pressure level whilst the air is being
released.
• The remaining air is released quickly once the meas-
urement is complete.
• Systolic pressure, diastolic pressure and
pulse measurements are displayed. On
the display, the resting indicator lights up
green or red depending on the assessment
of your haemodynamic stability.
32
. All display ele-
.
is displayed.