Tecno-gaz EUROPA B EVO Instrucciones De Uso página 75

A 501 Pressure not maintened
A 551 Irregular 1° temperature sensor
A 552 Irregular 2° temperature sensor
A 641 Overly high pressure
A 651 Overlay high temperature
A 661 Irregular temperature comparison
A 701 Working pressure not reached
A 751 Low temperature
A 761 Irregular pressor sensor
A 801 Irregular unloading pressure
Main voltage too low - Temporary lack of
A 901
electric energy
REPLACE RESINS Resins IONIC
SYSTEM exhaust
REPLACE FILTER  Resins OSMOSI
SYSTEM exhaust
The printer's door is not
D
closed
P Paper is missing
There is low voltage on the
Lo
line
In the event of one of the alarms persisting after some time, consult technical assistance.
Replacement of resins; refer to paragraph
14.3
Replacement of filter; refer to paragraph 14.3
Try to close the printer's door
Try to connect the machine to the net electrical worker in
an other point; if the problem persists to contact a
• Reset and restart cycle
• Reset and restart cycle
• Reset and restart cycle
• Reset and restart cycle
• Reset and restart cycle
• Reset and restart cycle
• Reset and restart cycle
• Reset and restart cycle
• Reset and restart cycle
• Reset and restart cycle
• Reset and restart cycle,
• Inform eletric Energy
provider
Insert paper
electrician
ENGLISH
29