Mettler Toledo ICS241 Instrucciones De Manejo página 37

Keyboard
Key lock
Info key
Note
Date & Time
Format
Date
Time
Morning/Afternoon
Beeper
Supervisor
Enter code
Retype code
Notes
Perform reset?
30232251A ICS241
Switch keys on/off and set Info key settings.
Select keys to lock/unlock.
Possible keys: Power ( ), Clear (C), Unit switch (
Numeric keypad (0-9).
Configure up to 20 items to be displayed using the info key ( ).
1. Select the item to be configured (Item 1 ... Item 20).
2. Assign contents.
• Locked keys cannot be activated with operator access, but the supervisor can still
activate these keys by entering his password.
• If you want to lock the tare key (
METTLER TOLEDO service technician.
Select date format.
Possible settings: yyyy/mm/dd 24h, dd/mm/yyyy 24h, mm/dd/yyyy 12h
Set date in the selected format.
yyyy/mm/dd, dd/mm/yyyy, mm/dd/yyyy
Set time in the following format: hh:mm
When time zone is selected, set AM/PM.
Switching beeper on/off.
Each keystroke can be confirmed by a short beep.
Terminal –> Access – Access to the supervisor level
Enter password for Supervisor menu access.
Request to enter password.
➜ Enter password and confirm with
Request to repeat the password entry.
➜ Enter password again and confirm with
• The password can consist of up to 4 characters (keys).
• must not be part of the password. It is required for confirming the password
and may only be used in combination with another key.
• If you enter a wrong password or make a typing error when retyping, Code error
appears on the display.
Terminal –> Reset – Reset terminal settings to factory settings
Confirmation inquiry.
• Reset the terminal settings to factory settings with YES.
• Do not reset terminal settings with NO.
), Info ( ), Transfer (
) and/or the zero key ( ), contact your
.
.
),
37
Menu settings