Equipment Switch Off; Indications On Remote Control Display - Lincar Mya 505 Manual Del Usuario

3-FLAME LIGHT (duration 5 min)
(burner stabilization)
During the working phase the appliance controls constantly the
temperature of the room. If during the working phase at the selected
power (i.e. pow.4) one of the two temperatures is reached, the appliance
reduce automatically the power and the display signals "WORK
MODULAT.

EQUIPMENT SWITCH OFF

-Pushing for few seconds the botton 3 on the control panel, the appliance starts
the switching off phase. The screw feeder motor will be disconnected and the
pellet stops falling down. The two fan ( the one of gas combustion and the one of
convection) will continue to work for some minutes until the exhaust gas temperature has
sufficiently been reduced, then the fans will automatically stop.
INDICATIONS ON DISPLAY
Display
The radiocontrol do
not receive a signal
NO SIGNAL
START
LOAD
PELLET
FLAME
LIGHT
WORK
WORK Working at reduced
MODULAT
COOLING
WAITING
Stand-By function it
ECO-STOP
STAND-BY
Automatic cleaning
CLEANING
BASKET
CLEANING
FINAL
Once the lighting phase has been completed,
the appliance starts working normally
Appliance phase
from appliance
Lighting element
heating
Initial fuel load
Fuel lighting
Working at power
power
Stand-By function
activated
is activated
cycle of burner
basket
Off Extinction
Explanations
Place the radiocontrol in the same room as the
appliance and eliminate every hindrance in radio
signal ( the aerial is placed in the back right part of
the appliance )
Lighting phase started, heating of the lighting element
Fuel started to convoy to the burner basket
The appliance has noticed the presence of fire in the
basket, stabilization phase starting.
The appliance has terminated the lighting phase and is
now ready to work at the selected power.
Room temperature has reached the selected values.
Room temperature has exceeded the selected one.
Appliance switch off waiting for diminution of
temperature.
Room temperature has exceeded the selected one,
appliance first reduce the power and then switches off
Appliance carries out an automatic procedure to
eliminate part of residuals remained into the burner
Appliance started the extinction phase and proceed
with the disposal of the fuel still into the basket.
51/128
IT-GB-FR-ES mod. 505
basket