Dimensions For Fumes Exhaust Tube Connection And Duct System - Lincar Mya 505 Manual Del Usuario

Inclination Roof C (°)
Re-flux area
Chimney
Pot Wind
Damping

DIMENSIONS FOR FUMES EXHAUST TUBE CONNECTION AND DUCT SYSTEM

• Please consider the stove model you have purchased.
If it is necessary to drill holes in the wall for the fumes exhaust tube, proceed as follows:
•
− Measure and mark the full-size points for stove connection on the wall.
− Drill the corresponding holes in the wall.
Connect the stove to the outer flue with a tube for fume exhaust.
−
If the connection of the fumes exhaust tube is NOT in horizontal position (eg.
−
upward direction), the exhaust tube must be placed at a safety distance of 100 mm
from the wall.
The dimensions for Fumes Exhaust Tube and Duct system are indicated on the
−
instruction sheet attached to the appliance.
A
15 1,85
30 1,50
45 1,30
60 1,20
Chimney pot
wind damping
Revolving
chimney pot
for strong
horizontal
41/128
H Re Flux Area Highness Z (m)
1,00 0,50
1,30 0,80
2,00 1,50
2,50 2,10
IT-GB-FR-ES mod. 505