Information About Scrapping; Environmental Information - Corghi EXACT 70 Manual De Uso

Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte
- Calibrate the sensors at least once every six
months.
- Keep the sensor mounting clamp guides clean.
- Keep the turntables and the oscillating foot-
boards on which the vehicle alignment is per-
formed perfectly clean and do not oil or grease
them.
INFormATIoN ABoUT
SCrAPPING
If the machine is to be scrapped, first separate the
electrical, electronic, plastic and ferrous parts.
Then dispose of them separately as prescribed by
law (Fig.66-67-68).
ENVIroNmENTAL
INFormATIoN
The disposal procedure described below must only
applies to machines with the symbol of the waste bin
with a bar across it
This product may contain substances which may
cause damage to the environment and human
health if not disposed of properly.
we are therefore providing you with the informa-
tion below in order to prevent these substances
from being released into the environment, and to
improve the use of natural resources.
Electrical and electronic equipment must not be
disposed of with ordinary municipal waste; it must be
disposed of separately by authorised facilities.
The symbol of the waste bin with a bar across it,
which appears on the product and on this page,
reminds users that the product must be disposed
of properly at the end of its working life.
This prevents the inappropriate disposal of the
substances which this product contains, or the
improper use of some of them, from having haz-
ardous consequences for the environment and
human health. It also helps to ensure the recovery,
Operator's Manual EXACT 70
on their data plates.
http://www.eichstaedt-elektonik.de
recycling and reuse of many of the materials these
products contain.
To allow this, the producers and distributors of
electrical and electronic equipment organise
special systems for the collection and disposal of
such equipment.
At the end of the product's working life, contact your
dealer for information about disposal procedures.
when you purchase this product, your dealer will
also inform you that you may return another worn-out
appliance to him free of charge, provided it is of the
same type and has provided the same functions as
the product just purchased.
Anyone disposing of the product otherwise than as
described above will be liable to prosecution under
the legislation of the country where the product is
scrapped.
we also urge you to adopt other environment-
friendly practices: recycle the internal and external
packaging which comes with the product and dis-
pose of spent batteries (if the product has them)
properly.
with your help, we can reduce the amount of natural
resources used to produce electrical and electronic
equipment, minimise the use of landfills to dispose
of old products, and improve quality of life by
preventing the discharge of potentially hazardous
substances into the environment.
EN
91