Tabla de contenido
Idiomas disponibles
Idiomas disponibles
descriptions;
↵ to confirm the vehicle selection and visualise
the data.
During selection, the vehicle code is shown in the
status bar.
In "car" alignment mode, the screen shows all the
cars and vans up to and including 3500kg; in "truck"
alignment mode, it displays all the trucks and vans
up to and including 3500kg.
recalls the market selection. The screen
only shows the vehicles on sale on the selected
market.
displays the vehicle descriptions sup-
plied by the manufacturers for wheel alignment
operations.
displays the commercial descriptions of
the vehicles.
main databank data display
Displaying the data for the selected vehicle from
the main databank.
copies the vehicle's data into a new user
databank record and opens it in modify mode.
Password input window
To access select the
icons.
In the relative fields, enter the old password and
the new one, which you will have to type in again
to check that it is correct.
Vehicle make records
To access select the
icons.
Position the cursor on the make card, select it with
84
Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte
,
and
,
and
http://www.eichstaedt-elektonik.de
↵ to visualise and/or modify it.
The fields highlighted in blue are compulsory.
during vehicle selection, identifies the new
makes entered by the user, not accompanied by the
specific graphic logo.
mEASUrING SITE CHECK
Lift check and sensor calibration utility. The
procedures are enabled automatically when the
wheel aligner is switched on if the "Yes" option is
selected for the "Alignment procedure customisa-
tion - Lift test" field in the user set-up.
If the procedure is enabled, the wheel aligner will
recall the lift check screen whenever it is switched on.
The procedure can also be recalled from the initial
screen using the
Lift check – mKS –
(fig.48)
wArNING
Do not use the check procedure to
level the lift.
This tool allows checking of the mechanical stability
of the lift used for the wheel alignment check. The
lift check function can only be used on lifts fitted
with clamps for the alignment sensors.
For the initial check and whenever you wish to reset
the system, proceed as follows:
1)
with the lift lowered, fit the sensors into the
clamps provided on the lift;
2)
level the sensors with the aid of a spirit level;
3)
save the sensor values, which will be used for
subsequent checks. The default password is
"mercedes". You will be prompted to provide
Operator's Manual EXACT 70
and
icons.
Capítulos
Tabla de contenido
