Blender; Troubleshooting; Cleaning And Servicing - Bosch MCM21 Serie Instrucciones De Uso

en
After using the appliance
Turn switch to 0.

Rotate the lid as far as possible in an

anti-clockwise direction and remove.
Rotate the bowl as far as possible in an

anti-clockwise direction and remove.
Remove tool.


Blender

Risk of injury from sharp blender
blades/rotating drive!
NEVER put fingers in the attached blender.
Before operating the appliance, always
attach the lid. Before removing/attaching
the blender, wait until the appliance has
come to a standstill.
Risk of scalding!
If processing hot liquids, steam escapes
through the funnel in the lid.
Add a max. 0.4 litres of hot liquid.
Warning!
Blender may be damaged.
Do not process frozen fruit or vegetables.
Do not operate the appliance at no-load.
Blending
Before operating the blender, attach the bowl
(6) and lid (7a) and lock in position.
Take the tools out of the bowl!
Attach the drive cover (2).

Attach the blender jug (10) and rotate

as far as possible in an anti-clockwise
direction.
Add ingredients; see "Recipes/

Ingredients/Processing".
Maximum capacity, liquid = 1 litres
(frothing or hot liquids max. 0.4 litres).
Optimum processing quantity of solid
ingredients = 125 g.
Attach the lid (11a) and lock into position

by rotating in an anti-clockwise direction.
Select the desired setting with the rotary

switch; see "Recipes/Ingredients/
Processing".
16
After blending
Turn switch to 0.

Rotate the blender as far as possible

in a clockwise direction and remove.
Rotate the lid in a clockwise direction

and remove.
Tip: It is recommended to clean the blender
immediately after use see "Cleaning and
servicing".
Adding more ingredients
Set the rotary switch to 0 (or as indicated

in the recipe).
Remove the lid (11a) and add the ingre-

dients
or
Remove the funnel from the lid and

gradually add solid ingredients through
the refill opening (11b).
or
Pour liquid ingredients through the funnel

(11c).

Troubleshooting

Fault
Appliance cannot be switched on.
Cause
Bowl or lid is not locked.
Remedial action
Attach and lock bowl/lid correctly.
Switch on appliance again.
Important information
If the fault cannot be eliminated,
please contact customer service.

Cleaning and servicing

Risk of electric shock!
Never immerse the base unit in water
or place under running water.
Warning!
Surfaces may be damaged.
Do not use abrasive cleaning agents.
Cleaning the base unit
Pull out the mains plug.

Wipe the base unit with a damp cloth.

If required, use a little detergent.
Robert Bosch Hausgeräte GmbH