Bosch MCM21 Serie Instrucciones De Uso página 15

Bowl with accessories/tools
Risk of injury from the rotating tools!
When operating the appliance, never place
fingers in the bowl (even when the appliance
has been switched off, the drive continues
rotating briefly). Change tools only when
the drive is at a standstill.
Do not operate the appliance without
the drive cover (blender drive).
Attach bowl (6) and rotate as far

as possible in a clockwise direction
(lug on bowl in slot on base unit).
Insert tool (8/9) as described in the

appropriate section. For tool selection
see "Recipes/Ingredients/Processing".
Add ingredients as described in the

appropriate section. For selection see
"Recipes/Ingredients/Processing".
Attach lid (7a) (arrow on the lid on the

arrow on the handle) and rotate as far
as possible in a clockwise direction
(lid lug in slot on base unit).
The arrows must match up exactly
as illustrated in the diagram.
Select the desired setting with the rotary

switch; see "Recipes/Ingredients/
Processing".
Appliance cannot be switched on until bowl
and lid have been attached and locked
(both lugs in slot on base unit, arrows
on lid and housing match up).
Fly cutter
for cutting, chopping, kneading.
Risk of injury from sharp blades!
Grip the chopping blade by the plastic
handle only (top end).
Insert the chopping blade (8a).

Add ingredients.

Attach the lid (7a) and pusher (7c).

Select the desired setting with the rotary

switch (1); see "Recipes/Ingredients/
Processing".
To add more ingredients, set the rotary

switch to0.
Remove the push block (7c) and add

ingredients through the refill opening (7b).
Note: The longer the processing time,
the smaller the food is cut or chopped.
Robert Bosch Hausgeräte GmbH
Chopping disc
for cream, egg white, milk shakes.
Insert chopping disc (8b).

Add ingredients.

Attach the lid (7a) and pusher (7c).

Select the desired setting with the rotary

switch (1); see "Recipes/Ingredients/
Processing".
To add more ingredients, select Setting 1

with the rotary switch.
Remove the push block (7c) and add

ingredients through the refill opening (6b).
Cutting discs
– Reversible slicing disc (9b)
e.g. for slicing cucumbers, cabbage,
beetroot, kohlrabi.
– Reversible shredding disc (9c)
e.g. for shredding carrots, celery.
– Chips cutting disc (9d)
for shredding and slicing
– Chipper disc (9e) when inserting, note
the location of the disc (see diagram).
Risk of injury from sharp blades!
Grip the cutting discs by the plastic
handle only.
Warning!
Blades may become blunt
Do not use the cutting discs for hard cheese
(Parmesan), nuts or horseradish.
Insert the disc holder (9a).

Insert cutting disc (9b/9c/9d).

The desired slicing/shredding side
face up.
Attach the cover (7a).

Select the desired setting with the rotary

switch; see "Recipes/Ingredients/
Processing".
Add food which is to be sliced or shredded

(7b) and push down with the push block
(7c), exerting a little pressure.
Note: Most types of food are processed
on Setting 1; only hard foods are processed
on Setting 2.
en
15