Husqvarna 520iLX Manual Del Usuario página 16

2. Pull out the line chute assembly.
3. Remove the nut that holds the trimmer head and the
drive disc.
Keypad
LED display
Green activate LED flashing
Red error LED flashing
The product does not start
Error LED is lit with red light
16
Troubleshooting
Possible faults
Low battery voltage.
Overload.
Temperature deviation.
The power trigger and the acti-
vate button are pressed at the
same time.
Dirt in the battery connectors.
The product needs servicing.
4. Replace the trimmer head.
5. Install the nut.
6. Install the line chute assembly.
7. Install the trimmer head.
Possible action
Charge the battery.
The cutting attachment is jammed. deacti-
vate the product. Remove the battery. Clean
the cutting attachment from unwanted mate-
rials.
Let the product cool down.
Release the power trigger and the product is
active.
Clean the battery connectors with com-
pressed air or a soft brush.
Contact your servicing agent.
756 - 012 - 15.02.2024