Idiomas disponibles
Idiomas disponibles
GB
Working safely with this product is possible only when the operating and safety information are read completely and the
instructions contained therein are strictly followed.
WARNING
Read all safety warnings, instructions,
illustrations and specifi cations provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Work area safety
□ Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
□ Do not operate power tools in explosive atmospheres, such as
in the presence of fl ammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
□ Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
Electrical safety
□ Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodifi ed plugs and matching outlets
will reduce risk of electric shock.
□ Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
□ Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
□ Do not abuse the cord. Never use the cord for carrying, pulling
or unplugging the power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
□ When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
□ If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
Personal safety
□ Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while
you are tired or under the infl uence of drugs, alcohol or
medication. A moment of inattention while operating power tools
may result in serious personal injury.
□ Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask, non-skid
safety shoes, hard hat or hearing protection used for appropriate
conditions will reduce personal injuries.
□ Prevent unintentional starting. Ensure the switch is in the off
For Your Safety
General power tool safety warnings
□ Remove any adjusting key or wrench before turning the
□ Do not overreach. Keep proper footing and balance at all
□ Dress properly. Do not wear loose clothing or jewellery. Keep
□ If devices are provided for the connection of dust extraction
□ Do not let familiarity gained from frequent use of tools allow
Power tool use and care
□ Do not force the power tool. Use the correct power tool for
□ Do not use the power tool if the switch does not turn it on and
□ Disconnect the plug from the power source and/or remove
□ Store idle power tools out of the reach of children and do
□ Maintain power tools and accessories. Check for misalignment
□ Keep cutting tools sharp and clean. Properly maintained cutting
□ Use the power tool, accessories and tool bits etc. in accordance
-position before connecting to power source and/or battery
pack, picking up or carrying the tool. Carrying power tools with
your fi nger on the switch or energising power tools that have the
switch on invites accidents.
power tool on. A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
times. This enables better control of the power tool in unexpected
situations.
your hair and clothing away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-related
hazards.
you to become complacent and ignore tool safety principles.
A careless action can cause severe injury within a fraction of a
second.
your application. The correct power tool will do the job better
and safer at the rate for which it was designed.
off . Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
the battery pack, if detachable, from the power tool before
making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
or binding of moving parts, breakage of parts and any other
condition that may aff ect the power tool's operation. If
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
tools with sharp cutting edges are less likely to bind and are easier
to control.
with these instructions, taking into account the working
conditions and the work to be performed. Use of the power
tool for operations diff erent from those intended could result in a
13
