Hilti PD-E Manual Del Usuario página 7

1.4 Product information
products are designed for professional users and only trained,
authorized personnel are permitted to operate, service and maintain the
products. This personnel must be specifically informed about the possible
hazards. The product and its ancillary equipment can present hazards if
used incorrectly by untrained personnel or if used not in accordance with
the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to inquire about the product.
Product information
Laser range meter
Generation
Serial no.
1.5 Laser information on the product
Laser information → page 3
Laser information
2 Safety
2.1 Safety instructions
2.1.1 Basic information concerning safety
In addition to the safety rules listed in the individual sections of these
operating instructions, the following rules must be strictly observed at
all times. The product and its ancillary equipment may present hazards
when used incorrectly by untrained personnel or when used not as directed.
▶ Keep all safety instructions and information for future reference.
▶ Stay alert, watch what you are doing and use common sense when
working with the product. Do not use the product while you are tired
or under the influence of drugs, alcohol or medication. A moment of
*2068470*
PD-E
01
Laser Class 2 based on the IEC60825-1 / EN60825-
1:2007 standard in compliance with CFR 21 § 1040
(Laser Notice 50).
Laser Class 2: Do not stare into the beam. Do not di-
rect the beam toward other persons or toward areas in
which other persons, who are not involved in the work
with lasers, may be present.
Recycle waste material.
2068470 English 3