Hilti PD-E Manual Del Usuario página 16

5.9.2 Painter's area
1. Aim the tool at the target point for the first room length and press the
"Measure" button.
▶ The result is saved as an intermediate result.
2. Aim the tool at the target for the next room length and press the
"Measure" button to take the measurement.
▶ The second result is shown in the intermediate results table. The
intermediate result shown in bold is the sum of the measured room
lengths.
3. Repeat this procedure until all room lengths have been measured.
4. Press the right arrow button to switch to room height and confirm by
pressing the "Measure" button.
5. Position and aim the tool for room height measurement and then take
the measurement.
▶ The room height is measured and displayed in the intermediate result
line. The painter's area is calculated immediately and shown in the
result line.
5.9.3 Layout function
1. Enter the distance manually. Do this by using the left or right arrow
buttons to select the keyboard symbol and confirm by pressing the
"Measure" button.
2. Select the applicable numbers and confirm by pressing the "Measure"
button.
3. To confirm the value, select the check mark symbol (tick) at the bottom
right corner.
4. Select the flag symbol.
▶ The distance you have entered will then be shown between the two
flags.
5. Press the "Measure" button to begin measuring.
▶ The arrows on the screen indicate in which direction you must move
the tool. When the target distance is reached, black arrows appear
above and below the distance shown in the display.
6. To repeat this distance measurement several times, move the tool further.
The number of times you have measured out this distance is shown on
the right of the screen.
7. Press the "Measure" button to stop measuring.
When the distance to be set out is reached, the currently used
measuring reference is shown in the display.
As an alternative to entering the distance manually, the distance to
be set out may also be measured with the tool. To do this, select the
symbol for single measurement and confirm your choice by pressing
the "Measure" button.
12 English 2068470
*2068470*