Hilti PD-E Manual Del Usuario página 15

2. Move the laser range meter toward or away from the target until the
desired distance is reached.
3. Press the "Measure" button briefly.
▶ The measured distance is shown in the lower line of the display.
▶ The distance measured in the previous measurement is shown in the
upper line of the display.
5.7 Selecting the angle unit
1. Select the angle unit symbol from the menu.
2. Navigate to the desired angle unit with the aid of the left or right arrow
buttons.
3. Select the desired angle unit by pressing the "Measure" button.
5.8 Measuring areas and volumes
5.8.1 Measuring rectangular areas
1. Aim the tool at the target point for the room width and press the
"Measure" button.
2. Aim the tool at the target point for the room length and press the
"Measure" button.
5.8.2 Measuring triangular areas
1. Aim the tool at the target point and press the "Measure" button.
2. Aim the tool at the target point and press the "Measure" button.
3. Aim the tool at the third target point and press the "Measure" button.
5.8.3 Measuring volumes
1. Aim the tool at the target point and press the "Measure" button.
2. Aim the tool at the next target point and press the "Measure" button.
3. Aim the tool at the next target point and press the "Measure" button.
5.8.4 Measuring cylindrical volume
1. Aim the tool at the corresponding target to measure the height of the
cylinder and press the "Measure" button.
2. Aim the tool at the next target point to measure the diameter of the
cylinder and press the "Measure" button.
5.9 Special functions
5.9.1 Automatic brightness sensor
▶ Select the symbol for the automatic brightness sensor from the special
functions menu.
The automatic brightness sensor automatically dims the lighting on
the display in dark surroundings. This saves battery power.
*2068470*
2068470 English 11