Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Mechanical Installation
Mechanical Installation
17
Dimension drawings can be found in chapter "Dimension Drawings" from p. 103.
17.1
Important Notes
Only qualified staff with knowledge of mechanical engineering are permitted to as-
semble the motor.
The mounting end of the motor is magnetized and will attract magnetic material. If
the motor is not mounted, this end of the motor must be covered to insure proper
cleanliness.
l
Protect the motor from unacceptable stresses.
Take care, especially during transport and handling, that components are not bent
and that insulation clearances are not altered.
l
The site must be free of conductive and aggressive material. If an encapsulated as-
sembly is required, please consult our applications department beforehand.
l
Assemble the motor according to the instructions on page 41
When assembling, ensure that the fastening of the motor is not mechanically over-
determined.
l
Ensure an unhindered ventilation of the motors and observe the permissible ambient
and flange temperatures. For ambient temperatures above 40°C please consult our
applications department beforehand.
English - 40
09/2012
Servomotors Cartridge DDR
Kollmorgen
Tabla de contenido
