Idiomas disponibles
Idiomas disponibles
LMP51 H
Bearings /
General
Brand
purpose
Esso
Beacon
EP2
Q8
Rembrandt
EP2
Mobil
Mobile-
grease XHP
222
Shell
Alvania
EP2
Texaco
Multifak
EP2
Molycote
Lubricating
STP
Brand
Gears
Bp
Castro
Esso
Q8
Mobil
Shell
Texaco
Molycote
BR2 Plus
Useful information
Log in to Atlas Copco www.atlascopco.com
You can find information concerning our products,
accessories, spare parts and published matters on
our website.
Ergonomic guidelines
Consider your workstation as you read through this
list of general ergonomic guidelines and see if you
can identify areas for improvement in posture,
component placement, or work environment.
• Take frequent breaks and change work posi-
tions frequently.
Free wheel
unit (gear
rim and
gear
wheels)
Free wheel
Beacon
EP2
Rembrandt
EP2
Alvania
EP2
Suntemp
LE 9102
Oil treat-
ment
Air lubrication
Energol E46
AroxEP46
Chopin 46
Almo oil 525
Torcula 32
Aries 32
© Atlas Copco Industrial Technique AB - 9836 1401 04
• Adapt the workstation area to your needs and
the work task.
• Adjust for convenient reach range by deter-
mining where parts or tools should be lo-
cated to avoid static load.
• Use workstation equipment such as tables
and chairs appropriate for the work task.
• Avoid work positions above shoulder level or
with static holding during assembly operations.
• When working above shoulder level, reduce
the load on the static muscles by reducing
the weight of the tool, using for example
torque arms, hose reels or weight balancers.
You can also reduce the load on the static
muscles by holding the tool close to the
body.
• Make sure to take frequent breaks.
• Avoid extreme arm or wrist postures, par-
ticularly for operations requiring a degree
of force.
• Adjust for convenient field of vision by mini-
mizing movement of the eyes and head during
the work task.
• Use the appropriate lighting for the work task.
• Select the appropriate tool for the work task.
• Use ear protection equipment in noisy environ-
ments.
• Use high-quality inserted tools or consumables
to minimize exposure to excessive levels of vi-
bration.
• Minimize exposure to reaction forces.
• When cutting:
A cut-off wheel can get stuck if the wheel is
either bent or if it is not guided properly.
Make sure to use the correct flanges for cut-
off wheels and avoid bending the wheel
during cut-off operation.
• When drilling:
The drill might stall when the drill bit
breaks through. Makes sure you use support
handles if the stall torque is too high. The
safety standard ISO11148 part 3 recom-
mends using something to absorb the reac-
tion torque above 10 Nm for pistol grip
tools and 4 Nm for straight tools.
• When using direct-driven screw or nutrun-
ners:
Safety Information
7
