Idiomas disponibles
Idiomas disponibles
SAFETY
This section contains information and important notes on safe commissioning and handling of the
machine.
For your personal safety, please read these operating instructions carefully before
commissioning. This will enable you to handle the machine safely and prevent
misunderstandings as well as personal injury and damage to property. Also observe
the symbols and pictograms used on the machine as well as the safety and danger
information!
9.1
Intended Use of the Machine
The machine is intended exclusively for the following activities:
Driving finishing nails and staples into wood and similar materials. Only use the types of
nails/staples within the specified machine limits.
HOLZMANN MASCHINEN
beyond this and for any resulting damage to property or injuries.
9.1.1
Technical Restrictions
The machine is intended for use under the following ambient conditions:
Rel. Humidity:
Temperature (operational)
Temperature (Storage, Transport)
9.1.2
Prohibited Use / Forseeable Misuse
-
Operating the machine without adequate physical and mental aptitude
-
Operating the machine without knowledge of the operating instructions
-
Changes in the design of the machine
-
Operating the machine in a potentially explosive environment
-
Operating the machine outside the specified ambient conditions
-
Remove the safety markings attached to the machine.
-
Modify, circumvent or disable the safety devices of the machine.
-
Machining of materials with dimensions outside the limits specified in this manual.
The improper use or disregard of the versions and instructions described in this manual will result
in the voiding of all warranty and compensation claims against Holzmann Maschinen GmbH.
9.2
User Requirements
The machine is designed to be operated by one person! The physical and mental suitability as
well as knowledge and understanding of the operating instructions are prerequisites for operating
the machine.
Please note that local laws and regulations may determine the minimum age of the
operator and restrict the use of this machine!
Before working on the machine, remove rings, bracelets, watches, chains etc., tie long hair
together if necessary, always wear close-fitting clothing when working on the machine and always
fold long sleeves inwards only.
Work on electrical components or equipment may only be carried out by a qualified
electrician or under the instruction and supervision of a qualified electrician.
9.3
General Safety Instructions
To avoid malfunctions, damage and health hazards when working with the machine, in addition to
the general rules for safe working, the following points must be observed:
HOLZMANN MASCHINEN GmbH
assumes no responsibility or warranty for any other use or use
www.holzmann-maschinen.at
max. 65 %
+5° C bis +40° C
-20° C bis +55° C
SAFETY
13
T5040
