Bluewater SPIRIT Manual Del Propietário página 13

T EC H N I C AL IN FO RM AT IO N
Parameter
Size W×D×H [mm (inches)]
Weight [kg (lbs)]
Power supply, earthed supply
Power supply, earthed supply US
Power (US)
Faucet with purified water quality indicator light
Compatible with Reverse Osmosis approved
household appliances
REQUIREMENTS FOR INLET WATER to water purifier
Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after
the system.
Only connect to the cold water supply. The temperature limits
are in the table below.
If the inlet water quality changes greatly, contact your Bluewater
dealer for advice.
For more detailed technical information see www.bluewatergroup.com
Description
Temperature [°C (°F)]
Inlet water flowing pressure [kPa (bar) (psi)]
TDS/PPM (Total Dissolved Solids)
Inlet water flow [l/min (gal/min)]
Conductivity µS/cm @ 25°C (77°F)
Hardness [°dH (grains per gallon)]
Turbidity (FNU)
Iron Fe(II) / Fe(III) (mg/l)
pH
Manganese (Mn )
2+
Chlorine (Cl )
2
150×365×462 (5.9×14.3×18.2)
15 (33)
220-240V 50/60 Hz, 10A
120V 60 Hz, 10A
350W (3Amps)
Optional

2–35 (36–95)
150 –1000 kPa (1.5 –10 bar)
(22–145 psi)
< 1200
> 6 (1.6)
< 1600
< 10 °dH (< 10.4 gpg)
< 0.5 FNU
< 0.5 / < 0.3 mg/l
6 - 9
< 0.3 mg/l
< 1.0 mg/l
13
EN
© Bluewater Group 2022