acre) cellare|
if playback starts instead of
recording
The cassette tab for that side has been
removed. To record on this cassette, cover
the hole with plastic tape. (See page 30.)
Is it necessary to set the MONITOR
button for recording?
No. The source mode is automatically
selected and SOURCE is displayed. If you
wish to monitor the recorded sound, press
the MONITOR button to select the TAPE
mode.
Checking the recording time ona
tape
To check the remaining recording time on a
tape:
1. Press the RESET button to reset the
counter to 0.00,
2
Press the P> button to advance the
tape to its end. The number on the
counter shows the approximate
recording time.
To check the total recording time of a tape,
first rewind the tape to its beginning, then
follow the same steps as above. (See "The
Accuracy of the Linear Counter" on page
22.)
