Mitsubishi Electric s-MEXT-G00 Serie Manual De Instrucciones página 29

UM_s-MEXT_ME28relC_00_12_19_ML
2.2. OPERATING GENERAL CHARACTERISTICS
2.2.1. Groups of masks and menu structure
The tree structures for moving around the various menus of the controller are shown below.
The masks may be accessed through different menus using the [UP] and [DOWN] keys shown in the following figures with a double arrow
[ENTER] or [ESC] keys are identified by
Power On
A
Main Mask   
Esc
Esc
Esc
Esc
Esc
Esc
Esc
Esc
A. Main mask See paragraphs 2.3 and 2.4.
B. The "Unit Menu" displays information such as temperature, pressure and circuit states.
C. The "Setpoint Menu" is used to set the setpoints for the various available functions. It is possible to set different setpoints depending on the
available function modes (heat resources present, humidifier present, and dehumidifier present, etc.). See paragraph 2.6
D. The "In/Out menu" shows the status of the digital inputs and values read from the analogue inputs.
It also shows the status of the digital outputs and the voltage supplied to the analogue outputs.
If I/O expansions are present (depending on the configuration parameters), the inputs and outputs of the latter are also shown.
E. The "Clock menu" is used to set and display the date and time and configure the time bands. See paragraph 2.6
F. The "Log menu" is used to display the list of alarm events recorded by the unit.
G. The "User menu" is used to display and set parameters relative to user programming of the unit. For setting the password (G.1) see paragraph
2.2.2
H. The "Service" menu is used by Service to display and set unit configuration parameters.
I. The "Factory menu" is used by the manufacturer to display and set unit configuration parameters.
USER MANUAL
.
PRG
key
Status pages
Esc / 
Esc
  
B
Select Unit Menu
  
C
Select Setpoint
Menu
  
D
Select I/O Menu
  
E
Select Clock
Menu
  
F
Select History
Menu
  
G
Select User Menu
  
H
Select Service
Menu
  
I
Select Factory
Menu
  
Figure 2-2: Tree for moving around the menus
Esc / 
Esc / 
Esc / 
Esc / 
Esc / 
G.1 G.2

Esc /  User Password
Esc
Service Password
Esc /  
Esc
Esc /  Factory Password 
Esc
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
30
Alarm key
Alarm Menu
   Esc /  Display Alarm
Unit Menu    Esc /  Display Unit
Setpoint Menu    Esc /  Display Setpoint
I/O Menu    Esc / 
Clock Menu    Esc /  Display Clock
History Menu Display History
   Esc / 
User Menu Display User
   Esc / 
Service Menu Display Service
   Esc / 
Factory Menu    Esc /  Display Factory
. The
Display I/O