Stahlwille TORSIOTRONIC Serie Manual De Instrucciones página 73

Basic menu operation
Basic menu operation
Moving in the menus
 Use the two arrow buttons to select a menu item.
The menu item is marked.
 To carry out further settings for a menu item or to
confirm a setting, press OK.
 To move back step by step in the menu or to
cancel inputs, press HOME.
Inputting values
The necessary data for a bolting operation are
queried in the direct inputs. The arrow buttons can
be used to increase or reduce the values.
 To increase or reduce the value slowly, briefly
press the corresponding arrow button once.
 To increase or reduce the value quickly, keep the
corresponding arrow button pressed.
 Once the desired value has been set, press OK.
28
Calling up direct input
Specific values for a fastening operation are defined
in direct input.
Proceed as follows to select direct input:
 Make sure that no forces are acting on the
TORSIOTRONIC .
®
 Switch on the TORSIOTRONIC
 Press the MENU button for approx. one second.
DIRECT INPUT is shown on the display.
Sequence plans defined with the
SENSOMASTER software and transferred to
the TORSIOTRONIC
menu, see page 29).
 Confirm with OK.
The settings for a threaded connection can now be
input.
.
®
are also available in this
®