Idiomas disponibles
Idiomas disponibles
Safety
Safety
Intended Purpose
The TORSIOTRONIC
®
screwdriver is used for measuring torques during
the controlled tightening and release of threaded
connections in the workshop area. To do this, an
appropriate plug-in tool must be connected to the
TORSIOTRONIC
.
®
Never exceed the maximum limit torque of 125 % of
the nominal value.
Proper use additionally includes:
Compliance with all of the notices contained in
these operating instructions, particularly the safety
instructions
Observance of and compliance with the relevant
accident prevention regulations of the responsible
trade association and all other applicable safety
regulations .
Any other use is regarded as improper.
STAHLWILLE Eduard Wille GmbH & Co. KG
accepts no liability for damage arising as a result of
this.
Improper operation particularly includes
The uncontrolled release of seized, e.g. rusted
tight, threaded connections
Use as a crowbar
Use as an impact tool.
6
electromechanical torque
Basic safety instructions
The TORSIOTRONIC
®
accordingly be handled with care. Avoid
mechanical, chemical or thermal influences which
exceed the stresses involved in proper use.
Make sure that extreme climatic conditions such as
cold, heat and humidity are unable to influence
accuracy.
Do not overload the TORSIOTRONIC
the measuring range data on the model plate under
all circumstances. The TORSIOTRONIC
otherwise be damaged.
Avoiding risks of injury
Do not use the TORSIOTRONIC
tool.
is a precision tool and must
. Adhere to
®
may
®
as an impact
®
