Dometic GROUP WAECO AirConServiceCenter ASC5000 Instrucciones De Uso página 90

Operation
1. First fit the service hoses for the AirCon Service Center to the vehicle
air conditioning system, and open the service couplings.
2. Press the cursor key
3. In the basic menu, use the cursor keys
tion":
4. Press ENTER to confirm.
5. Use the keypad (7) and the cursor keys to enter the vehicle data.
6. Press ENTER to confirm.
7. Enter the refrigerant filling quantity. Use the value shown on the filling
quantities sticker in the vehicle and enter it using the keypad (7) and
the cursor keys and press ENTER.
8. Use the cursor keys
system has two°connections (high pressure and low pressure) or only
one connection (high pressure or low pressure).
Press ENTER to confirm.
✓ The fully automatic air conditioning service is started.
The refrigerant is analysed during the air conditioning service (see
chapter "Analysing refrigerant" on page 84).
✓ After the air conditioning service has finished, you will be prompted to
disconnect the hoses (12) and (13) of the AirCon Service Center from
the vehicle air conditioning system.
9. Disconnect the service hoses (12) and (13) and press ENTER to con-
firm.
The service hoses will now be drained. The unit is then ready for fur-
ther use.
10. Put the valve caps of the vehicle air conditioning system back on the
connections.
90
or to access the basic menu.
Short selection
Free selection
Other selections
ENTER-OK
or to select whether the air conditioning
LP PORT
LP PORT
LP PORT
ENTER-OK STOP-EXIT
AirConServiceCenter
or to select "Short selec-
EN