Safety
Refrigerant must not be used in low-lying spaces such as assembly pits or
soakaways. Refrigerant is heavier than oxygen and therefore displaces the
air you need to breathe. This can cause a lack of oxygen when working in
unventilated assembly pits.
Take suitable precautions to ensure that leaking refrigerant is not able to
get into the drainage system.
Special information on refrigerant R-1234yf and safety measures as well
as protecting personnel and objects, including fire protection can be found
in the safety sheets of the refrigerant manufacturer.
2.4
Operational measures when using the unit
The operator must provide operating instructions according to TRG 402 for
each filling system (AirConServiceCenter). These operating instructions
must be used to train personnel in handling the unit.
The operator must ensure that personnel are instructed in the following
points at least once a year:
Special dangers when dealing with compressed gases
Safety guidelines when dealing with compressed gases
Health precautions when dealing with compressed gases
Operating the unit and performing service work on the unit
The operator must ensure that personnel appointed to perform service and
repair work as well as leak inspections are certified to deal with refrigerant
and filling systems.
Certification and knowledge of the applicable guidelines and standards
can be acquired from a training course at a chamber of trade, chamber of
industry and commerce or at any other recognised training facility.
70
AirConServiceCenter
EN