Dometic GROUP WAECO AirConServiceCenter ASC5000 Instrucciones De Uso página 77

AirConServiceCenter
✓ Afterwards the AirCon Service Center runs a software test.
✓ Afterwards a leak test is performed.
Take unit outside.
Connect the power supply.
The unit shows the following message:
Press ENTER to confirm.
If the refrigerant vessel has an excessive proportion of non-condensa-
ble gases (NCGs), the unit releases the non-condensable gases auto-
matically.
✓ Then the analysis unit is tested.
✓ When the start-up procedure is complete, the AirCon Service Center
displays the following:
Press ENTER to confirm.
The unit shows the following message:
EN
Software test.
Please wait
Leak test
Please wait
Switch off the unit
and take
outside!
Unit outside?
Ignition source?
Do not smoke!
Test the analysis unit!
Connect HP hose to the
fresh vessel for
R-1234yf!
The unit is
ready for use.
Refrigerant g.
PAG oil ml
UV tracer ml
11:56:35 10/03/11
Initial start-up
XXXX
XXX
XXX
77