Cameo PIXBAR G2 Manual De Usuario página 28

2. Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used, make
sure that damage to the device is prevented (e.g. fans must be blocked in this case, as they
could otherwise over-rev.).
3. Cables and connectors must be cleaned regularly and dust and dirt must be removed.
4. In general, no cleaning agents or abrasive agents may be used, otherwise the surface finish
may be damaged.
5. Devices must be stored in a dry environment and protected from dust and dirt.
6. To ensure correct and safe operation, all accessible or removable lenses and light-emitting
apertures must be cleaned regularly.
MAINTENANCE AND REPAIR (by qualified personnel only)
DANGER! There are live components in the device. Even after disconnecting from
the mains, there may still be residual voltage in the device, e.g. due to charged
capacitors.
PLEASE NOTE! There are no user-serviceable assemblies in the device.
PLEASE NOTE! Maintenance and repair work may only be carried out by sufficiently
qualified specialist personnel. If in doubt, consult a specialist workshop.
PLEASE NOTE! Improperly performed maintenance work may affect the warranty
claim.
PLEASE NOTE! For conversion or retrofit sets provided by the manufacturer, be sure
to observe the enclosed installation instructions.
OPTIONAL ACCESSORIES
CLPBG2FILTER55
55° frost filter
CLPBG2FILTER70
70° frost filter
CLPBG2FILTER2555
25° x 55° Frost filter
CLPBG2STACKKIT
Connecting element for the secure mechani-
cal connection of two PIXBAR
28
G2
®
CLPBG2VERTIMOUNT
Stop set for mounting a PIXBAR
Omega mounting bracket CLOMEGABRA-
CKET1 and for mounting on the connection
set CLPBG2M20ADA
CLOMEGABRACKET1
Omega mounting bracket
CLPBG2M20ADA
Connection set for mounting a PIXBAR
on a stand with M20 thread
G2 on the
®
G2
®