Cameo PIXBAR G2 Manual De Usuario página 27

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 94
GLARE SHIELD
A glare shield is included with the PIXBAR
threads on the top edge of the housing (1). Mount the glare shield on the desired side of the
PIXBAR
G2 using the three knurled screws (2).
®
CARE, MAINTENANCE AND REPAIR
In order to ensure the long-term, proper functioning of the device, it must be regularly cleaned
and, if necessary, serviced. The servicing requirement depends on the intensity of use and the
environment in which it is used.
A visual inspection should be carried out before each commissioning. In particular, all safe-
ty-relevant components, such as connecting elements, safety points, electrical connections and
cables, must be taken into account. Furthermore, we recommend carrying out all the applicable
maintenance measures specified below once every 500 operating hours or, in the case of a lower
intensity of use, at the latest after one year. Warranty claims may be limited should defects result
from inadequate service and maintenance.
CARE (carried out by user)
WARNING! Before carrying out any care or maintenance, the power supply – and, if
possible, all device connections – must be disconnected.
PLEASE NOTE! Improper care can lead to impairment of the device or even its
destruction.
1. Housing surfaces must be cleaned with a clean, damp cloth. Make sure that no moisture can
penetrate the device.
G2. On both sides of the PIXBAR
®
2
1
G2 there are three
®
27
loading

Este manual también es adecuado para:

Pixbar tw ip g2Clpbtwipg2