Cameo PIXBAR G2 Manual De Usuario página 21

Dimming
behaviour
=
and PWM
frequency
Colour
=
calibration
Operational
status on
=
control signal
interruption
= Mirror pixels
Store all sys-
tem settings
=
in 3 custom
presets
SERVICE MENU (Service)
Starting from the main screen, press MENU to enter the main menu. Use UP and DOWN to select
Service and confirm with ENTER.
Information on the submenu items in the Service menu and the corresponding options can be
found in the table below (select with UP and DOWN, confirm with ENTER, change value or status
with UP and DOWN, confirm with ENTER).
Simulates the colour drift when dim-
ming a halogen light. When dimming the
light, the colour temperature changes
automatically to increasingly warm white
tones and amber (and vice versa).
Function disabled
Constant brightness at all CCT values
Maximum brightness at all CCT values
Amber, warm white and cold white with
a maximum value of 255
Custom calibration. Cross-mode bright-
ness setting of amber, warm white and
cold white with values from 0 - 255
Last command is retained
The last selected stand-alone operating
mode is activated
10 s fade to blackout
Instant blackout
Full On
Function disabled
Pixels are mirrored
Store with ENTER
Store with ENTER
Store with ENTER
21