Cameo PIXBAR G2 Manual De Usuario página 23

INSTALLATION
DANGER: Installation, especially overhead installation, requires extensive experi-
ence, relevant & up-to-date expertise and competence, including the calculation of
working load limits, the installation material used and regular safety checks of all
installation materials and fixtures! If you do not have these qualifications, do not at-
tempt to carry out an installation yourself, but use the help of appropriately qualified
specialist companies! There is a risk that devices that are incorrectly mounted and
secured may come loose and fall down. This can cause serious injury or death.
Thanks to the adjustable stand or mounting feet, the PIXBAR
position on a level floor (e.g. as an uplight).
When several PIXBAR
®
spacing at the transitions from one to the next PIXBAR
MOUNTING A PIXBAR
Mounting on a truss is done using optionally available truss clamps, which are either attached
directly to the mounting feet (1), or to optionally available Omega mounting brackets (part number
CLOMEGABRACKET1). The mounting feet can be moved on the housing of the PIXBAR
this, loosen the middle of the five internal hexagon screws (2), move the foot to the desired posi-
tion and tighten the screw again. The beam direction can be adjusted using the tommy screws (3)
on the mounting feet. Ensure that the connections are tight and that the PIXBAR
loose. When mounting the PIXBAR
the safety lugs provided (4). When mounting several docked PIXBAR
each individual PIXBAR
secured with a suitable safety cable.
G2 are docked, the unique coupling mechanism ensures uniform pixel
ON A TRUSS
®
G2 overhead, secure it with a suitable safety cable to one of
®
G2 must be attached separately to the truss with the mounting feet and
®
G2 can be set up in a suitable
®
G2.
®
G2 horizontally overhead,
®
G2. To do
®
G2 cannot come
®
23