Cameo PIXBAR G2 Manual De Usuario página 20

Wireless
=
settings
Display
=
settings
Dimming
behaviour
=
and PWM
frequency
20
Pair with W-DMX devices. W-DMX must
be enabled on all devices, and the
pairing with a transmitter must be reset
(Receive Reset).
Send incoming signal to XLR connector
Use the XLR input signal in case the
W-DMX signal is lost.
No connection between W-DMX signal
and XLR connectors
Rotate display by 180° (e.g. for overhead
installation)
No display rotation
Display illumination permanently on
Deactivate display illumination after
approx. 20 seconds of inactivity
Function disabled
The controls and display are locked
after approx. 60 seconds without any
operation. Unlock: Press UP and DOWN
simultaneously for approx. 5 seconds
Dimmer curve: The light intensity in-
creases linearly with the DMX value
Dimmer curve: The light intensity can be
adjusted finely in the lower DMX value
range and coarsely in the upper DMX
value range
Dimmer curve: The light intensity can be
adjusted coarsely in the lower DMX value
range and finely in the upper DMX value
range
Light intensity can be adjusted finely
at lower and higher DMX values and
coarsely at medium DMX values
Select LED PWM frequency
The light responds abruptly to changes
in DMX value
The fixture behaves like a halogen light
with smooth brightness changes