Cameo PIXBAR G2 Manual De Usuario página 13

ENTER – Press ENTER to access the menu level in order to make value or status changes, and to
access one of the sub-menus. Confirm value or status changes by pressing ENTER.
PLEASE NOTE:
• Before navigating the menu, make sure that the control panel is dry and clean so
that its functionality is not impaired.
• Moisture on the control panel can lead to incorrect operation of the fixture, e.g. in
outdoor conditions. Therefore, activate the lock function after configuring the light
to prevent incorrect operation due to moisture (Settings -> Display -> Autolock).
7
PRESSURE EQUALISATION ELEMENT
Pressure equalisation element to prevent condensation inside the housing. In order to ensure its
proper function, the element must be protected from dirt.
8
W-DMX ANTENNA
™
Antenna for W-DMX control.
™
ATTENTION: In order to provide protection from water sprays in accordance with the
IP65 protection class, the special DMX input and output sockets must be used with
special IP65-rated XLR connectors, or they must be sealed using the rubber caps.
When connected correctly, or when sealed correctly with the rubber sealing caps, the
POWER IN and POWER OUT sockets are protected from water sprays in accordance
with IP65.
13